3M™ Safety & Security Film Safety S70

3M™ Safety & Security Window Film Safety S70 (SH7CLARL)

Technical Data

Product Features & Benefits

  • Optically clear, 7-mil (0.18 mm) thick film for application to interior glass surface
  • Provides shatter resistance to protect from broken glass hazards caused by seismic activity, spontaneous glass breakage, and other impact events
  • Typical applications include bomb blast mitigation and safety glazing
  • Can be combined with 3M Impact Protection Attachment systems for additional safety and security
  • Exhibits strong adhesion to glass and shock absorbing properties
  • Protective hardcoat provides scratch resistance and durability
  • Protects from the harmful effects of UV light and reduces fading of interior furnishings
  • Easily cleaned with typical window cleaning solutions

Product Performance & Technical Data

 Safety S70
Single PaneTintedDouble PaneDouble tinted
 Film1/4″ ClearSafety S701/4″ tintSafety S70Dual 1/4″ ClearSafety S70Dual 1/4″ tintSafety S70
Solar Heat Gain Coefficient 0.82 0.79 0.63 0.59 0.70 0.68 0.51 0.46
Visible Light Transmitted89%86%47%47%79%77%47%43%
Visible Light Reflected Interior 9% 9% 6% 6% 15% 16% 13% 8%
Visible Light Reflected Exterior 8% 9% 6% 6% 15% 16% 8% 8%
U Value1.031.031.031.030.470.470.470.47
UV Block38%98%NA99%NA99%NA99%
Total Solar Energy Rejected 19% 21% 37% 41% 30% 32% 49% 54%
Glare ReductionNA3%NA1%NA3%NA9%
Heat Loss ReductionNA0%NA0%NA0%NA0%
Solar Heat ReductionNA3%NA6%NA3%NA9%

Film Properties* (nominal)

  ProductFilm ThicknessSingle or Multi-plyTensile StrengthBreak StrengthElongation at BreakAbrasion Resistance
Safety S700.007”Single25,000 psi175 lbs/in>125 %< 5% haze increase

*not for specification purposes

Important:

The information provided in this report is believed to be reliable; however, due to the wide variety of intervening factors, 3M does not warrant that the results will necessarily be obtained. All details concerning product specifications and terms of sale are available from 3M.

3M™ Safety Film Safety S70 was designed for usage on the interior surface of windows. The film is visco elastic and obsolescence resistant. High resistance of the film to stretch and crack extension increases the resistance of glass to pressure, push and impacts. Even distribution of the sun’s rays effectively reduces the effect of dazzle. Besides, the film greatly significantly reduces the amount of UVA rays which are the main reason of discolouration.

3M™ Safety Films provide an effective protection from injuries or damage to items caused the fragments of broken glass. In case of glass breakage the fragments are hold due to the system of the adhesive.

Features (on 6 mm clear glass)

Total solar energy reduction:       21 %

G-value:                                     0.79

Reduction of Glare:                     2 %

Reduction of UV rays:                 98 %

Structure of the film

Thickness:                                   0,175 mm / 175 µ

Colour:                                         Clear

Material of the film:                      Polyester

Adhesive:                                    Special Acrylic

Top coating:                                Scratch resistant hard coat

Installation

3M Window films are installed using water and a soap solution. Full adhesion is reached after approximately 20 days at 18°C (in dry conditions).

Cleaning

3M Window films may be cleaned 30 days after installation using ordinary window cleaning agents and avoiding the use of abrasive particles. Do not use rough sponges, cloths or brushes. Synthetic sponges, soft wipes or rubber squeegee cleaners are recommended. Do not clean 3M films dry.

Glass typeFilm TypeSCVLR %VLT %Emissivityu-valueg-valueTSER
Single Pane
ClearNo Film Safety S700.94 0.908 % 9 %88 % 86 %0.84 0.871.06 1.090.82 0.7918 % 21 %
TintedNo Film Safety S700.69 0.715 % 8 %50 % 49 %0.84 0.871.06 1.090.60 0.6340 % 37 %
Douple Pane
ClearNo Film Safety S700.81 0.7914 % 17 %78 % 75 %0.84 0.870.50 0.500.70 0.7030 % 30 %
TintedNo Film Safety S700.55 0.588 % 9 %45 % 43 %0.84 0.870.50 0.500.48 0.5052 % 50 %

General notes:

All 3M Safety films have been tested to EN12600 and/or EN356 as appropriate. For detailed information and relevant certification for any specific project, please contact your local 3M specialist.

All technical data is based on a combination of relevant European test methods and/or US test methods. Before using this product the customer / applicator must ensure the product is suitable to be used for the intended purpose. If there is any uncertainty, please check with your local 3M Window Film specialist. All issues regarding warranty and liability for the product and the effect of its use are governed in accordance with the provisions of the appropriate contract of sale unless local laws dictate otherwise.

Author: Azeem Khan

My goal is to make my presence on the internet with Physical Industrial & Commercial Product which will enable people to find them easily via my websites.

Leave a Reply

Your email address will not be published.